Spatiotemporal variations, health risk assessment, and sources of potentially toxic elements in potamic water of the Anday Stream Basin (Türkiye), Black Sea Region.

Monitoring and protecting freshwater habitats are paramount for a sustainable water management perspective. This study investigated potentially toxic elements (PTEs) in the potamic water of the Anday Stream Basin (Türkiye), Black Sea Region, for a hydrological year (from May 2020 to April 2021). Among PTEs, the highest average values were recorded for sodium (Na) at 41.3 mg/L and the lowest for mercury (Hg) at 0.009 µg/L and noted under quality guidelines. The stream was found to be at the level of "Low Heavy Metal Pollution" and "Low Contamination" based on the ecotoxicological risk indices. The highest calculated hazard quotient (HQ) value of 1.21E-02 for Cd was noted in the children via the dermal pathway and the lowest of 6.91E-06 for Fe in adults via the ingestion pathway. Results revealed a higher hazard index (HI) value of 1.50E-02 for Cd to children and the lowest of 1.98E-05 for Fe to adults. As a result of applying agricultural risk indices, the stream showed sodium adsorption ratio values less than 6 and was found to be "Excellent" for agriculture. However, the sodium percentage values were less than 20 and found "Permissible" and the magnesium hazard > 50 and noted as "Unsuitable" for agriculture. Statistical analysis revealed that natural factors mainly attributed to PTE contamination of the Anday Stream Basin.

Assessment of coastal river water quality in Bangladesh: Implications for drinking and irrigation purposes.

Saltwater intrusion in the coastal areas of Bangladesh is a prevalent phenomenon. However, it is not conducive to activities such as irrigation, navigation, fish spawning and shelter, and industrial usage. The present study analyzed 45 water samples collected from 15 locations in coastal areas during three seasons: monsoon, pre-monsoon, and post-monsoon. The aim was to comprehend the seasonal variation in physicochemical parameters, including water temperature, pH, electrical conductivity (EC), salinity, total dissolved solids (TDS), hardness, and concentrations of Na+, K+, Mg2+, Ca2+, Fe2+, HCO3-, PO43-, SO42-, and Cl-. Additionally, parameters essential for agriculture, such as soluble sodium percentage (SSP), sodium absorption ratio (SAR), magnesium absorption ratio (MAR), residual sodium carbonate (RSC), Kelly's ratio (KR), and permeability index (PI), were examined. Their respective values were found to be 63%, 16.83 mg/L, 34.92 mg/L, 145.44 mg/L, 1.28 mg/L, and 89.29%. The integrated water quality index was determined using entropy theory and principal component analysis (PCA). The resulting entropy water quality index (EWQI) and SAR of 49.56% and 63%, respectively, indicated that the samples are suitable for drinking but unsuitable for irrigation. These findings can assist policymakers in implementing the Bangladesh Deltaplan-2100, focusing on sustainable land management, fish cultivation, agricultural production, environmental preservation, water resource management, and environmental protection in the deltaic areas of Bangladesh. This research contributes to a deeper understanding of seasonal variations in the hydrochemistry and water quality of coastal rivers, aiding in the comprehension of salinity intrusion origins, mechanisms, and causes.

Trace metals and nutrient analysis of marine fish species from the Gwadar coast.

Trace metals are naturally occurring metals found in very small concentrations in the environment. In the context of fish flesh, metals such as copper, calcium, potassium, sodium, zinc, iron, and manganese are absorbed by fish and play vital roles in various physiological functions. However, if these metals exceed the recommended limits set by WHO/FAO, they are termed 'toxic metals' due to their harmful impacts on both the fish and its consumers. Therefore, the present study aims to analyze the levels of protein, lipids, and certain metals-Aluminum (Al), Sodium (Na), Zinc (Zn), Titanium (Ti), Iron (Fe), Copper (Cu), Potassium (K), and Calcium (Ca) in three commercially important marine fishes i.e. Rastrelliger kanagurta, Sardinella abella, and Otolithes ruber. The study also aims to assess their potential impact on human health. The macro-Kjeldhal method and Soxhlet apparatus were used to estimate protein and lipid contents, while atomic absorption spectroscopy (AAS) was used to estimate trace metals found in fishes. The study found that these fish species are valuable sources of protein, lipids, and certain essential minerals. The protein content (CP) in these three species ranged from 63.35 to 86.57%, while lipid content was from 21.05 to 23.86%. The overall results of the trace metal concentrations analyzed in the present study revealed that Aluminum (Al), Sodium (Na), Zinc (Zn), Titanium (Ti), Copper (Cu), Potassium (K), and Calcium (Ca) were found in low concentration or traces and also within suitable ranges as set by WHO/FAO. However, Iron (Fe) was absent in all three species. Moreover, both copper and potassium were found in all three species, while Zinc was present in Rastrelliger kanagurta and Sardinella abella, calcium in Sardinella abella, and sodium in Otolithes ruber only. Titanium was recorded for the first time in S. abella. However, the total health risk assessment associated with these fish food consumption was measured by THQ and TTHQ and found to be less than 1, which shows no potential risk related to trace metals found in these fishes on human health upon their consumption. In conclusion, these commercially important marine fish species were found valuable sources of protein, lipids, and essential trace minerals that are necessary for human health. Thus, the current study provides useful information for the local population to make informed decisions about their daily diets and highlights the importance of sustainable fishing practices to maintain these valuable marine resources by periodical monitoring of their ecosystem.

"Milk on Ice": A detailed analysis of Ernest Shackleton's century-old whole milk powder in comparison with modern counterparts.

Whole milk powder (WMP) manufactured in New Zealand in 1907 was sent to the Antarctic continent with the Shackleton-led British Antarctic Expedition from 1907 to 1909. This powder was stored at ambient conditions at Shackleton's Hut at Cape Royds, Antarctica, for over 100 yr before a sample was collected on behalf of Fonterra by the Antarctic Heritage Trust. Having spent most of its existence both dried and in frozen storage, any deleterious reactions within the WMP would have been markedly retarded. The composition and some properties of the roller-dried Shackleton's WMP are reported along with those of 2 modern spray-dried New Zealand WMP. The Shackleton powder was less white and more yellow than the modern WMP and was composed of flakes rather than agglomerated particles, consistent with that expected of a roller-dried powder. Headspace analysis showed lipolytic and oxidative volatile compounds were present in the Shackleton WMP, indicting some deterioration of the milk either before powder manufacture or on storage of the finished product. On a moisture-free basis, the Shackleton WMP had higher protein, higher fat (with a markedly higher free fat level), higher ash, and a lower lactose level than the modern WMP. The lysine level was lower in the Shackleton WMP compared with the spray-dried powders, whereas the fatty acid composition was relatively similar. The sodium level was markedly higher in the Shackleton WMP compared with the spray-dried powder, which is probably due to the addition of an alkaline sodium salt to adjust the pH of the milk before roller drying. Lead, iron, and tin levels were markedly higher in the Shackleton WMP compared with the spray-dried powders, possibly due to the equipment used in powder manufacture and the tin-plated cases used for storage. The proteins in the Shackleton WMP were more lactosylated than in the spray-dried powders. The Shackleton WMP had a higher ratio of κ-casein A to B variants and a higher ratio of ß-lactoglobulin B to A variants than the spray-dried powders, whereas the αS1-casein, ß-casein, αS2-casein, and α-lactalbumin protein variants were similar in all powders. The total phospholipid content was markedly lower in the Shackleton WMP than the spray-dried powders, primarily due to a lower phosphatidylethanolamine concentration. The molecular species distributions within the phospholipid classes were generally similar in the 3 powders. Claims are sometimes encountered that the milk of today is different from that consumed by previous generations. However, this comparative study has shown that the Shackleton WMP was generally similar to modern WMP. Although differences in some components and properties were observed, these were attributable to the manufacturing equipment and processes used in the pioneering years of WMP manufacture.

Evaluation of spatial and temporal dynamics of seawater intrusion in coastal aquifers of southeast India: insights from hydrochemical facies analysis.

This study aims to investigate and understand the temporal and spatial movement of seawater intrusion into the coastal aquifers. Groundwater salinity increase has affected the entire eastern part of the study area and is primarily influenced by direct and reverse ion exchange reactions associated with intrusion and freshwater influx phases, which alternate over monsoons. To gain insights into the spatiotemporal dynamics of the seawater intrusion process, hydrochemical facies analysis utilizing the HFE-Diagram was employed. Additionally, the study considered the major ionic changes during both the monsoons. The HFE-Diagram analysis of hydrochemical facies revealed distinctions in the behaviour of each coastal aquifer concerning seawater intrusion-induced salinization. In PRM 2020, the data shows that approximately 65% of the samples fall under the freshening phase, while the remaining 35% were categorized as intrusion phase. Within the freshening phase, seven different hydrochemical facies were identified, including Na-Cl, Na-MixCl, MixNa-MixCl, Na-MixHCO3/MixSO4, MixNa-MixSO4, Na-HCO3, and MixCa-HCO3. In contrast, the intrusion phase had four facies: MixCaMixHCO3, MixNa-Cl, Ca-Cl, and Na-Cl. Especially, the Na-Cl facies (f1) within the freshening phase attributed for the largest percentage, contributing 30% of the samples. In POM 2021, the distribution of samples shifted slightly, with approximately 72.5% belonging to the freshening phase and 27.5% to the intrusion phase. Within the freshening phase of POM 2021, five hydrochemical facies were identified: Na-Cl, Na-MixCl, Na-MixHCO3/MixSO4, MixNa-MixSO4, and Na-HCO3. The intrusion phase of POM 2021 had three facies: MixNa-Cl, Na-Cl, and MixCa-Cl. Similar to PRM 2020, the Na-Cl facies (f1) remained the most predominant in the freshening phase, comprising 30% of the samples. The relation between total dissolved solids (TDS) and various ionic ratios, such as HCO3-/Cl-, Na+/Cl-, Ca2+/Cl-, Mg2+/Cl-, K+/Cl-, and SO42-/Cl-, clearly demonstrates the presence of seawater influence within the coastal aquifers of the study area.

Color stability of bleached tooth enamel brushed with different stain-removing toothpastes.

OBJECTIVE: The effects of four toothpastes on the color stability of in-office bleached tooth specimens were determined. MATERIALS AND METHODS: We evaluated an experimental toothpaste (EXP) and three commercially available toothpastes: Colgate Optic White (OPW), Aquafresh White & Protect (AWP), and Crest 3D White (CDW). OPW, AWP, and CDW contained inorganic abrasives, whereas EXP and AWP contained sodium polyphosphate. Forty-eight randomly selected human-extracted maxillary central incisors were bleached and brushed twice daily over 30 days. We analyzed the final color difference (ΔE*ab, ΔE00 , ΔWID ), arithmetic average surface roughness (Ra) of the enamel measured on days 0 and 30, and scanning electron microscopy images of enamel surfaces and toothpastes. ΔE*ab, ΔE00 , ΔWID , and Ra were analyzed using one-way analysis of variance and Tukey's test (α = 0.05). RESULTS: ΔE*ab and ΔE00 values were significantly lower after toothbrushing with EXP, OPW, and CDW than with AWP. OPW induced the greatest positive ΔWID . Ra was significantly increased by OPW and CDW, but slightly increased by AWP, with cube-like particles, and EXP, with no particle-like structures. CONCLUSIONS: Only EXP stabilized the color of bleached teeth without increasing the enamel surface roughness. Sodium polyphosphate with approximately 10 phosphate groups was effective at removing stains. CLINICAL SIGNIFICANCE: The effect of toothpaste on the color stability of bleached teeth depends on the constituting abrasives and chemical components. Polyphosphoric acid has different stain-removal effects depending on its degree of polymerization. Additionally, although certain types of abrasives may be effective for color stability, they also increase the surface roughness of the enamel.

Sodium Content in Pre-Packaged Foods in China: A Food Label Analysis.

Sodium intake from pre-packaged foods is increasing in China and is well above the WHO recommendation of 5 g per day. The purpose of this study is to analyze the sodium content of pre-packaged foods collected by the National Institute for Nutrition and Health, Chinese Center for Disease Control and Prevention (NINH, China CDC) in 20 provinces of China from 2017 to 2022. The proportion of pre-packaged foods that meet or exceed the low-sodium, medium-sodium, and high-sodium classifications were analyzed. The proportion of pre-packaged foods that meet and do not meet the WHO global sodium benchmarks and the difference in sodium content between these foods was also calculated. High-sodium foods include sauces, dips, and dressings (3896 mg/100 g), convenience foods (1578 mg/100 g), processed fish products (1470 mg/100 g), processed meat products (1323 mg/100 g), processed poultry products (1240 mg/100 g), snack foods (750 mg/100 g), processed egg products (741 mg/100 g), and fine dried noodles (602 mg/100 g). A large number of pre-packaged foods currently collected in China have a sodium content above sodium benchmarks. This study provided data to support the assessment of sodium intake from pre-packaged foods in the Chinese population and the implementation of comprehensive salt reduction strategies.

The diagnostic power of salivary electrolytes for Sjögren's disease: a systematic literature review and meta-analysis.

OBJECTIVES: To perform a systematic review and meta-analysis to determine the power of salivary electrolytes for the diagnosis of Sjögren's disease (SjD). METHODS: A literature search was conducted (last search March 2023) using PubMed and Web of Science and completed with a manual search. Articles were screened for reports of human salivary ion concentrations, comparing SjD patients with healthy controls and/or sicca patients. Articles not using the SjD classification criteria or performing the classification as part of the experimental design were excluded. Forest plots were used to present the meta-analyses results for each ion, distinguishing between salivary type (unstimulated and stimulated whole saliva, submandibular/sublingual and parotid saliva). RESULTS: A total of 21 out of 722 articles were eligible for inclusion. For SjD patients a significant increase in salivary ion concentration was observed for sodium, chloride and calcium when comparing to healthy controls. Significant differences between SjD and sicca patients were noted for sodium, chloride, phosphate, calcium, phosphate, nitrite and nitrate. Stimulated whole saliva showed larger variability in results between studies in comparison to other types of saliva (unstimulated whole saliva, submandibular/sublingual saliva and parotid saliva). CONCLUSIONS: Despite differences in saliva type, salivary ion levels could be utilised for the screening for SjD. Making use of chloride in combination with sodium would be most promising for distinguishing SjD patients from healthy controls and adding phosphate to potentially make a distinguishment with sicca patients. Unstimulated whole saliva should be the first choice when testing salivary ion concentrations.

Evaluación de la composición en ácidos grasos, colesterol, magnesio potasio y sodio de los menús servidos en los comedores colectivos de un colegio e instituto de la Comunidad Valenciana / Evaluation of the composition in fatty acids, cholesterol, magnesium,potassium and sodium of the menus served in the collective canteens of a school and institute of the Valencian Community

Introducción: El aumento de la incidencia y prevalenciade la obesidad en la población infantojuvenil, el exceso deconsumo de sodio, colesterol y grasas saturadas son factoresque implican un incremento del riesgo cardiovascular en laedad adulta, y como consecuencia un problema de salud co-munitaria grave. Por ello se ha desarrollado el presente tra-bajo que incluye la segunda parte del Programa Bon Profitpara una alimentación saludable y responsable en el comedorescolar. Se ha evaluado: la calidad de los lípidos, (atendiendoa su composición en ácidos grasos, contenido en colesterol),así como el contenido en sodio (Na), Potasio(K) y Magnesio(Mg) de los menús servidos en el comedor escolar.Objetivo: Estudio y valoración de la composición en ácidosgrasos, colesterol, Na, K y Mg de los menús escolares, paraevaluar el riesgo cardiovascular, para posteriormente haceruna intervención nutricional: en diseño y elaboración de me-nús y en hábitos alimentarios, con el fin de corregir los me-nús ofertados por la empresa y prevenir el riesgo cardiovas-cular y de obesidad.Materiales y métodos: Se han valorado 28 menús queconstituyen un total de 56 platos. Cada plato se ha muestre-ado durante un periodo de tres meses, mediante método depesada directa, y valorado con el programa informáticoDIAL®, para determinar la composición lipídica: ácidos gra-sos saturados (AGS), monoinsaturados (AGM) y poliinsatura-dos (AGP), colesterol y contenido en sodio (Na), potasio(K) ymagnesio (Mg). Posteriormente se han comparado los valoresobtenidos con las recomendaciones nutricionales para la po-blación estudiada de 900 escolares entre 3 y 19 años.Conclusiones y resultados: Se puede concluir que tantoen los menús del colegio como en los del instituto, la compo-sición en AGS, AGM y AGP sobrepasa las recomendaciones (AU)

Arginine or Hypertonic Saline-Stimulated Copeptin to Diagnose AVP Deficiency.

BACKGROUND: Distinguishing between arginine vasopressin (AVP) deficiency and primary polydipsia is challenging. Hypertonic saline-stimulated copeptin has been used to diagnose AVP deficiency with high accuracy but requires close sodium monitoring. Arginine-stimulated copeptin has shown similar diagnostic accuracy but with a simpler test protocol. However, data are lacking from a head-to-head comparison between arginine-stimulated copeptin and hypertonic saline-stimulated copeptin in the diagnosis of AVP deficiency. METHODS: In this international, noninferiority trial, we assigned adult patients with polydipsia and hypotonic polyuria or a known diagnosis of AVP deficiency to undergo diagnostic evaluation with hypertonic-saline stimulation on one day and with arginine stimulation on another day. Two endocrinologists independently made the final diagnosis of AVP deficiency or primary polydipsia with use of clinical information, treatment response, and the hypertonic-saline test results. The primary outcome was the overall diagnostic accuracy according to prespecified copeptin cutoff values of 3.8 pmol per liter after 60 minutes for arginine and 4.9 pmol per liter once the sodium level was more than 149 mmol per liter for hypertonic saline. RESULTS: Of the 158 patients who underwent the two tests, 69 (44%) received the diagnosis of AVP deficiency and 89 (56%) received the diagnosis of primary polydipsia. The diagnostic accuracy was 74.4% (95% confidence interval [CI], 67.0 to 80.6) for arginine-stimulated copeptin and 95.6% (95% CI, 91.1 to 97.8) for hypertonic saline-stimulated copeptin (estimated difference, -21.2 percentage points; 95% CI, -28.7 to -14.3). Adverse events were generally mild with the two tests. A total of 72% of the patients preferred testing with arginine as compared with hypertonic saline. Arginine-stimulated copeptin at a value of 3.0 pmol per liter or less led to a diagnosis of AVP deficiency with a specificity of 90.9% (95% CI, 81.7 to 95.7), whereas levels of more than 5.2 pmol per liter led to a diagnosis of primary polydipsia with a specificity of 91.4% (95% CI, 83.7 to 95.6). CONCLUSIONS: Among adult patients with polyuria polydipsia syndrome, AVP deficiency was more accurately diagnosed with hypertonic saline-stimulated copeptin than with arginine-stimulated copeptin. (Funded by the Swiss National Science Foundation; CARGOx ClinicalTrials.gov number, NCT03572166.).

Assessment of quality and safety aspects of homemade and commercial baby foods.

Dietary Guidelines in some countries recommend avoiding commercially processed baby food, while others encourage the consultation of ingredients and nutritional information. Therefore, the objective of this study was to systematically analyze different baby foods obtained from commercial market and "homemade" produced, in order to verify whether comercial products have low nutritional and unsafety attributes. The samples were analyzed for chemical composition, physicochemical aspects, texture, microbiological and mycotoxin contamination, and pesticide residues. Results showed that, in general, commercial samples have a higher energy density and better ratio of macronutrients. The sodium, pH, and texture of both products were in accordance with the recommendations. None of the baby foods evaluated were contaminated with yeast and molds, total coliforms, or Escherichia coli; however, Salmonella sp. was confirmed in one homemade sample. Pesticide residues were detected in all analyzed baby food samples; however, at lower levels than the limit of quantification. Ochratoxin A was detected in one homemade baby food sample (5.76 µg /kg). Considering the samples evaluated, commercial baby food samples appeared to be safer in relation to microbiological, pesticide residue standards, and mycotoxin contamination. Therefore, it could be concluded that the quality of commercial and homemade baby foods still needs to be improved, as well as more studies related to a critical analyses of both types of processes used.

Evaluating the Energy and Core Nutrients of Condiments in China.

Condiments are a significant source of sodium in the diets of Chinese residents. This study aimed to analyze the nutrient content of China's major condiments and to provide support for setting the reference intake for condiments in order to take measures on salt reduction in China. Nutrition data for condiments were collected from the Database on Nutrition Labelling of Prepackaged Foods China in 2017-2022, and by online access to food composition databases from France, the UK, Belgium, and Japan. The analyses include 1510 condiments in China and 1565 related condiments in four countries, of which the descriptive indicators were examined such as median, IQR, and range. Cross-comparisons were made in terms of the difference between the content levels in five countries and the "WHO global sodium benchmarks". The results show that among the 15 types of condiments in China, sesame/peanut butter-based products have a relatively high content of energy, fat, and protein, namely, 2580 kJ/100 g, 50 g/100 g, and 22.2 g/100 g, respectively. In addition to salt, chicken extract/chicken powder, bouillon cubes, and soy sauce are also high in sodium. Furthermore, there were significant differences in the contents of energy and core nutrients across different products when benchmarking with similar condiments in the five countries (p < 0.001). The sodium content and fat content of some condiments are excessively high. Therefore, enhancing residents' consumption awareness and reducing the amount of condiments is of great significance for reducing China's per capita salt intake and promoting good health.

An integrated approach for evaluating freshwater ecosystems under the influence of high salinity: a case study of Manchar Lake in Pakistan.

Manchar Lake, Pakistan's biggest lake in the arid zone, faces human-induced salinity issues. This study investigated its effects on the multifaceted ecosystem services, including serving as a source of drinking and irrigation water and aquatic health through assessing fish diversity and characteristics. Analyses of 189 water samples from 21 sites revealed spatiotemporal variations in major ions contributing to lake water salinity. The study assessed water suitability for drinking and agriculture using the water quality index (WQI), sodium adsorption ratio (SAR), magnesium hazard (MH), sodium percent (Na%), and Kelly's ratio (KR). The WQI, ranging from 141 to 408, indicated that the lake water was unfit for drinking. In some seasons, such as the pre-monsoon period, the lake water was deemed unsuitable for irrigation due to high SAR values (18 ± 4 g/L, average ± standard deviation), consistently rising MH values exceeding 66 in all seasons and elevated sodium percentages surpassing 66% in both the pre-monsoon and monsoon seasons. The KR remained acceptable (averaging 0.8 to 2.5) in all seasons. Fish health in highly saline conditions was assessed using data from interviews, focus group discussions, and fish sampling (1684 fish from 10 sites). Results depicted that high salt contamination severely impacted fish length and weight. The study found low richness (Simpson's biodiversity: 0.697 and Shannon Weaver: 1.51) and evenness (Pielou's index: 0.48) among the fish populations. Since 1998, Manchar Lake has seen a decline in fish varieties from 32 to 23, with changes in fish species' feeding habits. To improve lake water quality, the study recommends diverting saline water to the sea before and after the monsoon season while utilizing freshwater from alternative sources to fill any water deficit.

Identifying the hydrochemical features, driving factors, and associated human health risks of high-fluoride groundwater in a typical Yellow River floodplain, North China.

Fluoride enrichment (> 1.5 mg/L) in groundwater has become a global threat, particularly given the hazards to human health. This study collected 58 unconfined groundwater samples from Fengpei Plain in June 2022 for hydrochemical and stable isotope analyses combined with multiple methods to explore sources, influencing factors, and potential health hazards of groundwater F-. The results showed that groundwater F- concentration ranged from 0.08 to 8.14 mg/L, with an average of 1.91 mg/L; over 41.4% of them exceeded the acceptable level of 1.5 mg/L prescribed by the World Health Organization (WHO). The dominant hydrochemical facies changed from Ca·Mg-HCO3 and Ca·Mg-SO4·Cl type in low-F- groundwater to Na-HCO3 and Na-SO4·Cl water types in high-F- groundwater. The Self-Organizing Map (SOM) and ionic correlation analysis indicated that F- is positively correlated to pH, EC, Na+, K+, SO42-, and TDS, but negatively to Ca2+ and δ18O. Groundwater F- accumulation was primarily driven by F--bearing minerals dissolution such as fluorite. Simultaneously, the carbonates precipitation, positive cation exchange processes, and salt effect were conducive to groundwater F- enrichment. However, competitive adsorption between OH-/HCO3- and F-, evaporation, and anthropogenic activities only had a weak effect on the F- enrichment in groundwater. The hazard quotient (HQ) assessment results show that 67.2% of groundwater samples pose a non-carcinogenic risk (HQ > 1) for infants, followed by 53.4% for children, 32.8% for females, and 25.9% for males. The Monte Carlo simulation results agreed with those of the deterministic model that minors are more susceptible than adults. These findings are vital to providing insights into the geochemical behavior, driving factors, and drinking water safety of high-F- groundwater worldwide.

Evaluating IMPROVE PM2.5 element measurements.

The Interagency Monitoring of PROtected Visual Environments (IMPROVE) network has collected airborne particulate matter (PM) samples at locations throughout the United States since 1988 and provided chemical speciation measurements on the samples using several techniques including X-ray fluorescence (XRF). New XRF instruments for measuring PM elemental content of IMPROVE samples were introduced in 2011. To evaluate the performance of these new instruments relative to the old instruments, archived sample from three IMPROVE monitoring sites were retrieved and analyzed on the new instruments. The agreement between the two instruments varied by element. Comparisons of the results were very good (slopes within 10% of unity) for most elements regularly measured well above the detection limits (sulfur, chlorine, potassium, titanium, vanadium, manganese, iron, copper, zinc, selenium, lead). Different particle compositions at the three sites highlighted different measurement interferences. High sea salt concentrations at the coastal site emphasized corrections applied in the old systems to light elements - sodium and magnesium - and resulted in poor agreement for these elements. Comparisons of the XRF measurements with collocated sulfate measurements by ion chromatography suggest that sulfur measurements from the new instruments are more precise but slight underestimates. Comparing elemental ratios to expected ratios for soil-derived PM demonstrate the new instruments are better at resolving the aluminum and silicon peaks.Implications: The presented work represents a comprehensive analysis of the method change enacted within the Interagency Monitoring of PROtected Visual Environments (IMPROVE) air monitoring network. This work describes the implications of the last change in elemental quantification methodology. The most important point for data users performing longitudinal analyses is that light elements (e.g., sodium - sulfur) were affected; the old instrumentation overestimated these elements while the current measurements are slightly underestimated. The authors recommend these results to be taken into consideration when interpreting sea salt and crustal sources of atmospheric dust.

Improving Quantitative Accuracy in Nontargeted Lipidomics by Evaluating Adduct Formation.

For large-scale lipidomic analyses, accurate and reproducible quantification of endogenous lipids is crucial for comparing results within and across studies. Many lipids present in liquid chromatography-electrospray ionization-mass spectrometry form various adducts with buffer components. The mechanisms and conditions that dictate adduct formation are still poorly understood. In a positive mode, neutral lipids like mono-, di-, and triacylglycerides and cholesteryl esters typically generate [M + NH4]+ adduct ions, although [M + Na]+, [M + K]+, and other (more complex) species can also be significantly abundant in MS1 precursor ion spectra. Variations in the ratios of these adducts (within and between matrices) can lead to dramatic inaccuracies during quantification. Here, we examine 48 unique diacylglycerol (DAG) species across 2366 mouse samples for eight matrix-specific data sets of plasma, liver, kidney, brain, heart muscle, gastrocnemius muscle, gonadal, and inguinal fat. Typically, no single adduct ion species accounted for more than 60% of the total observed abundance across each data set. Even within a single matrix, DAGs showed a high variability of adduct ratios. The ratio of [M + NH4]+ adduct ions was increased for longer-chain DAGs and for polyunsaturated DAGs, at the expense of reduced ratios of [M + Na]+ adducts. When using three deuterated internal DAG standards, we found that absolute concentrations were estimated with up to 70% error when only one adduct ion was used instead of all adducts combined. Importantly, when combining [M + NH4]+ and [M + Na]+ adduct ions, quantification results were within 5% accuracy compared to all adduct ions combined. Additional variance can be caused by other factors, such as instrument conditions or matrix effects.

Fuzzy logic, geostatistics, and multiple linear models to evaluate irrigation metrics and their influencing factors in a drought-prone agricultural region.

The quality of water used for irrigation is one of the major threats to maintaining the long-term sustainability of agricultural practices. Although some studies have addressed the suitability of irrigation water in different parts of Bangladesh, the irrigation water quality in the drought-prone region has yet to be thoroughly studied using integrated novel approaches. This study aims to assess the suitability of irrigation water in the drought-prone agricultural region of Bangladesh using traditional irrigation metrics such as sodium percentage (NA%), magnesium adsorption ratio (MAR), Kelley's ratio (KR), sodium adsorption ratio (SAR), total hardness (TH), permeability index (PI), and soluble sodium percentage (SSP), along with novel irrigation indices such as irrigation water quality index (IWQI) and fuzzy irrigation water quality index (FIWQI). Thirty-eight water samples were taken from tube wells, river systems, streamlets, and canals in agricultural areas, then analyzed for cations and anions. The multiple linear regression model predicted that SAR (0.66), KR (0.74), and PI (0.84) were the primary important elements influencing electrical conductivity (EC). Based on the IWQI, all water samples fall into the "suitable" category for irrigation. The FIWQI suggests that 75% of the groundwater and 100% of the surface water samples are excellent for irrigation. The semivariogram model indicates that most irrigation metrics have moderate to low spatial dependence, suggesting strong agricultural and rural influence. Redundancy analysis shows that Na+, Ca2+, Cl-, K+, and HCO3- in water increase with decreasing temperature. Surface water and some groundwater in the southwestern and southeastern parts are suitable for irrigation. The northern and central parts are less suitable for agriculture because of elevated K+ and Mg2+ levels. This study determines irrigation metrics for regional water management and pinpoints suitable areas in the drought-prone region, which provides a comprehensive understanding of sustainable water management and actionable steps for stakeholders and decision-makers.

Evaluation of Darbandikhan Lake and its tributaries' water quality in the Sulaymaniyah Province in Iraqi Kurdistan, using the water quality index model and multivariate statistical analysis.

This study evaluated the characteristics of the water in Darbandikhan Lake and its rivers in the Kurdistan Region of Iraq. For this purpose, 25 samples were collected seasonally and analysed for 36 physiochemical parameters. The proportions of physiochemical parameters exceeding the WHO standards in the samples with their highest exceedances were 9894% for Al, 198% for Mn, 40% for Pb, 1.6% for pH, 3250% for PO4, 11.8% for Sr, 155% for T.Alk, 7813% for turbidity, 1188% for Ti, 1033% for Tl and 1293% for V in the river water and 120% for Co, 74% for Cr, 4485% for Fe and 9% for K in the lake water. The pollution sources were designated by multivariate statistical analysis as being related to industrial and domestic waste, solid waste disposal, fertilisers and organic contamination from agricultural and natural sources. The water quality index (WQI) results were 22.3 to 721.3 for drinking, 13.9 to 86.2 for irrigation, 1.4 to 299.5 for livestock, 71.5 to 1754.4 for the textile industry, 20.7 to 237.9 for recreation and 64.6 to 1867.4 for aquatic life. The irrigation water quality index (IWQI) results were excellent for sodium adsorption ratio (SAR), and for the US salinity scale, all water samples fell into the medium salinity-low sodium category (C2-S1) in all seasons, except for all Chaqan River samples. The Tanjaro River sample in spring fell in the relatively high salinity-low sodium category (C3-S1), excellent and good for sodium percentage (Na%), suitable to moderate for permeability index (PI%), suitable to unsuitable for magnesium hazard percentage (MH%), suitable for Kelly Index (KI) and safe to unsuitable for residual sodium carbonates (RSC). The Sirwan River, Tanjaro River and Zmkan River took first to third place in both the annual average pollution share ratio and the discharge. While the Zalm River ranked fourth in discharge and fifth in pollution share ratio, the Chaqan River was the reverse. The highest pollution share ratio was 64.3 for the Sirwan River in summer, and the lowest was 0.7 for the Zalm River in autumn.

Coupling hydrogeochemistry and stable isotopes (δ2H, δ18O and δ13C) to identify factors affecting arsenic enrichment of surface water and groundwater in Precambrian sedimentary rocks, eastern salt range, Punjab, Pakistan.

The study area is a part of the Salt Range, where water quality is being deteriorated by natural and anthropogenic sources. This research integrates water quality assessment, arsenic enrichment, hydrogeochemical processes, groundwater recharge and carbon sources in aquifer. Total dissolved solid (TDS) contents in springs water, lake water and groundwater are in range of 681-847 mg/L, 2460-5051 mg/L and 513-7491 mg/L, respectively. The higher concentrations of magnesium and calcium in water bodies next to sodium are because of carbonates, sulfates, halite and silicates dissolution. The average concentrations of ions in groundwater are in order of HCO3- > SO42- > Cl- > Na+ > Mg2+ > Ca2+ > K+ > NO3-, virtually analogous to springs water, but different from lake water, categorized as poor quality and unfit for drinking purposes. Based on major ions hydrochemistry, NaCl and mixed Ca-Mg-Cl type hydrochemical facies are associated with concentration of arsenic (4.2-39.5 µg/L) in groundwater. Groundwater samples (70%) having arsenic concentration (11 ≤ As ≤ 39.5 µg/L) exceeded from World Health Organization (WHO) guideline (As ≤ 10 µg/L) in near neutral to slightly alkaline (6.7 ≤ pH ≤ 8.3), positive Eh(6 ≤ Eh ≤ 204 mV), signifying its oxic condition. Eh-pH diagrams for arsenic and iron indicate that 80% of groundwater for arsenic and iron were in compartments of HAsO42- and Fe(OH)3, unveil oxic environment. Arsenic is moderately positive correlated with TDS, sodium, chloride, bicarbonate, nitrate, sulfate and weak negative with δ13CDIC in surface and groundwater, forecasting multiple sources of arsenic to aquifer. Stable isotopes of waters show recharge of groundwater from local rain and lake water. The lower δ13CDIC values of groundwater are modified by influx of CO2 produced during biological oxidation of soil natural organic matter.

Alleviating air pollutant-associated hypertension by potassium intake in Korean adults: a cross-sectional study from the 2012-2016 Korea National Health and Nutrition Examination Survey.

Air pollution may increase the risk of hypertension (HTN) by increasing oxidative stress and inflammation, and reducing sodium excretion. Potassium intake may reduce the risk of HTN through sodium excretion and reduce inflammation and oxidative stress. This study is aimed at investigating the association between air pollutants and HTN and whether these associations differ based on the potassium intake data of Korean adults from the 2012-2016 Korean National Health and Nutrition Examination Survey (KNHANES). This cross-sectional study used data from KNHANES (2012-2016) combined with annual air pollutant data from the Ministry of Environment using administrative units. We included 15,373 adults who responded to the semi-food frequency questionnaire. Associations between ambient PM10, SO2, NO2, CO, and O3 with HTN according to potassium intake were assessed using the survey logistic regression model for complex samples analysis. After adjusting for potential covariates such as, age, sex, education level, smoking status, family income, alcohol consumption, body mass index (BMI), exercise status, and survey year, as the air pollutant score considering the five air pollutants increased (severe air pollution), the prevalence of HTN increased in a dose-dependent manner (p for trend < 0.001). Meanwhile, in the adults with higher potassium intake and who were exposed to lowest levels of air pollutants score (score = 0), the ORs of HTN were significantly lower (OR = 0.56, 95% CI: 0.32-0.97). In conclusion, our study suggests that exposure to air pollutants may increase the prevalence of HTN among Korean adults. However, high potassium intake may help prevent HTN caused by air pollutants.